Sending the same vial twice, under two names
Two years ago we ran an anonymised version of this comparison and promised a named one. This is it, with every method printed in full.
TheCompound Journal
Reporting on incretins, compounding & the peptide supply chain
Institutions
What a laboratory can and cannot know about the provenance, storage history and representativeness of what lands on its bench.
Some of this is fixable and some is not. The condition of material on arrival is recordable and two of the four services record it: whether the vial was intact, whether the seal was undisturbed, whether the cake looked normal, whether the package showed evidence of a temperature excursion. That line converts an unknown into a datum and it costs the time it takes to write a sentence. The identity of the person who chose the vial, by contrast, is not something a laboratory can establish at all, which is why the Journal reports the submitter alongside every third-party figure it cites.
The most important sentence in every third-party report in this market is the one identifying what was tested, and it always says the same thing: the sample submitted. That phrasing is precise and correct, and the entire trade reads past it. A result obtained on one vial extends to a batch only if the vial is representative, and representativeness is a property of how the vial was selected, not of how carefully it was analysed.
In regulated practice, sampling is a controlled activity in its own right: the accreditation standard treats it as part of the laboratory activity, requiring a documented sampling plan and records of how the portion tested was obtained.1 Where a laboratory receives a sample it did not draw, the standard expects the report to make clear that the results apply to the sample as received. All four services do this. The market quotes them anyway as though the batch had been tested, which inverts the pharmacopoeial convention that a result on a sample is evidence about a batch only under a stated sampling assumption.2
The practical significance depends on the fill. A batch filled in a single session from a homogeneous bulk solution is likely to be uniform, and a single vial is decent evidence about it. A batch assembled from subdivided bulk, filled across sessions, or blended from more than one synthesis is not, and a single vial is evidence about a vial. Nothing on a report tells a reader which situation applies, because the laboratory does not know either.
What a laboratory can record about a submitted sample begins at the moment of receipt, and the better reports in this market record a surprising amount: the date and time of arrival, the condition of the outer packaging, whether cold-chain materials were present and still cold, whether the vial seal was intact, whether the crimp showed evidence of having been lifted, and the appearance of the cake. Two of the four services record most of this as standard. The others record some of it.
These lines are worth more than they look. A vial arriving with a collapsed cake or a discoloured plug is telling a reader about storage and transit history that no purity figure captures, and a report that notes it has converted an unknown into a datum. Condition on arrival is also the only point in the entire chain at which anybody independent observes the material’s physical state, and it is therefore the only opportunity to catch a transit problem before it is analysed away.
What no laboratory can record is what happened before the package was posted. The submitter’s storage, the route from vendor to submitter, the number of times the vial changed hands, the ambient temperature of a fortnight in a sorting facility: all of it is prior to custody and none of it is knowable. The Journal accordingly cites third-party purity figures with the submission date and, where we know it, the submitter, because those two facts bound what the figure can support.
A laboratory cannot fail a vendor. It can only issue a report to whoever paid for it.
On the limits of the word verificationThe identity of the submitter is the single most informative piece of context attached to any third-party report, and it is the piece most often missing when a report is quoted. A test commissioned by a buyer on a vial bought anonymously at retail is a different evidential object from a test commissioned by the vendor on a vial it selected from its own stock. Both are legitimate. They support different inferences, and the difference is not small.
In the buyer-submitted case the vial entered the postal system as an ordinary retail unit and its selection was outside the vendor’s control, which is exactly the property that makes the result informative about what a customer receives. In the vendor-submitted case the vendor chose the vial, knew it was being tested, and will decide whether the result is published. Nothing improper need occur for the second to produce a more flattering picture than the first, and no laboratory can distinguish them from the bench.
The Journal’s practice is to state the submitter type wherever it cites a figure, and to decline to cite a figure where the submitter is unknown. This is more restrictive than the market’s convention and it means we publish fewer numbers. It also means that when we say a result came from an anonymous retail purchase, that claim is doing work.
| Analysis | Quoted turnaround | Observed turnaround | Price band (EUR, single sample) |
|---|---|---|---|
| Purity, generic gradient | 3–5 working days | 4–9 days | 55–90 |
| Purity, extended gradient | 5–10 working days | 7–16 days | 110–180 |
| Purity + orthogonal confirmation | 2–3 weeks | 15–31 days | 190–320 |
| Identity by intact mass | 3–7 working days | 5–12 days | 45–110 |
| Peptide content by nitrogen | 1–2 weeks | 9–22 days | 160–280 |
| Water by Karl Fischer | 1 week | 6–11 days | 70–130 |
| Peptide mapping / sequence | 3–5 weeks | 26–38 days | 480–950 |
| Prices are the amounts actually invoiced to this publication at list rates between the second quarter of 2024 and the first quarter of 2026, converted where necessary at the rate on the invoice date, and are not quotations any reader should expect. Volume submitters pay materially less. Turnaround is measured from posting to receipt of the report. | |||
The decay is worth tracing precisely, because at no step does anybody say anything false. The laboratory reports a purity figure for the sample as received, on a stated date, by a stated method, submitted by a named party. The vendor extracts the figure and the service name onto its own documentation, dropping the submitter and often the method. A reseller reproduces the vendor’s documentation, dropping the date. A listing summarises the whole chain as tested by a named service. A badge reduces it to verified.
Each step is a reasonable act of summarisation and the cumulative effect is a claim of a different kind from the one the laboratory made. A time-indexed measurement on one sample has become an atemporal property of a product line. The information was not concealed; it was compressed away by a chain of parties each of whom had a legitimate reason to shorten the message.
This is why the Journal reports the provenance of every third-party figure it cites — which service, which lot, which date, which submitter — and treats a figure lacking any of those as uncitable. It makes our coverage sparser than the market’s. It also means that a number appearing in this publication can be traced to a document, which is the only property that distinguishes reporting from repetition.
Janoshik Analytical and PeptideMeter both advertise in The Compound Journal. Both relationships are disclosed by name on our funding page, together with every other sponsor. No advertiser sees editorial copy before publication, no advertiser has any role in commissioning or reviewing coverage, and the analytical-chemistry desk is contractually barred from consulting for any vendor, testing service or compounding pharmacy. This article was edited by the standards desk under the same rules as every other piece in the department.
The Journal also pays these services. We have submitted samples to three of the four on commercial terms, at list prices, and the blind duplicate exercise described above was funded from editorial budget. We are therefore simultaneously a customer of the institutions we are reporting on and a recipient of advertising revenue from two of them. Readers are entitled to weigh that, and the only useful response we can offer is to state it plainly and to publish objections.
Our position on the substance is unchanged by any of it. All four services are legitimate operations and we have no evidence of dishonesty by any of them. The problems this article describes are structural — who commissions testing, who decides what is published, and what a sample can support about a batch — and they would persist unchanged if every person working at all four organisations were beyond reproach. Correspondence to standards@compoundjournal.com.
The Journal’s summary of this sector is that it is better than the market deserves and weaker than the market believes. Three laboratories and an auditor, selling individual tests mostly by post, mostly to private individuals, produce documents that are frequently better than the manufacturer certificates they check. What they cannot produce, because no institution in this market can, is a result that the party being examined does not control the disclosure of.
Two years ago we ran an anonymised version of this comparison and promised a named one. This is it, with every method printed in full.
Nothing on this page is difficult. It is simply unfamiliar, and unfamiliarity is what makes a weak certificate look like a strong one.
The supplier has not disputed the finding. It has not explained the gap either.
Documentation practice is the only part of vendor quality a buyer can assess before purchase.
The route did not close because of a rule about peptides.
A retest date says that material should be re-examined before use. An expiry date says it should not be used. The trade uses the second word for the first concept.